> RRP Racing Pillow Upper II for ZC33S
RRP Racing Pillow Upper II for ZC33S Agrandir l'image

RRP Racing Pillow Upper II for ZC33S

Nouveau produit

  • Butée d'amortisseur rotulée avec carrossage réglable de 0 à 2 degrés (vis excentrique)
  • Made in Japan, à la commande uniquement
  • Notes technique ci dessous

Plus de détails

Sur commande

588,50 € TTC

Fiche technique

Famille Chassis, Suspension

En savoir plus

Renewal by changing the fixing method and structure to the vehicle!

Adopting a machined aluminum body and a high-precision pillow ball, it achieves a direct and sharp steering feel.
Eliminates the cornering that occurs with genuine rubber bush upper mounts, and direct movement to the suspension draws out damper performance.

Compared to the previous type, the dimensions of each part have been revised, and the fixing method has been changed to pinching the body to reduce the total weight.
In addition, the load capacity has been increased by increasing the size of the pillow ball.

The camber adjustment function allows you to adjust the camber from 0 degrees to about -2 degrees, so fine alignment adjustment is possible and the range of settings according to the vehicle and circuit is expanded.

* About mounting to other than RRP car harmonics
By installing Racing Pillow Upper II, the vehicle height increases by 20mm to 30mm. Be sure to check that the current vehicle height can be lowered by 20mm to 30mm.
A full-length adjustable inverted type harmonic drive is recommended. The center pillow nut is M12-P1.25 specification.

  • Aluminum machined body
  • R's red anodized
  • High precision large pillow ball
  • Camber angle adjustment 0 degree--2 degree
  • 1 set of 2 left and right